Get in Touch
Close

Contact Us

Unit 10/11, James Gregory Centre
Campus Two, Bridge of Don
Aberdeen AB22 8GU
United Kingdom

07447098876

info@robin3dprint.co.uk

What Does a Custom 3D Print Cost in the UK?

Two 3D-printed lizards on a turquoise rock on the printer bed

What Does a Custom 3D Print Cost in the UK?

Put two parts of the same weight on a scale and the reading will tell you very little about their price. Imagine a simple spacer supplied as a finished CAD model and a replacement dial that has to be drawn from a broken original. The dial might use less filament. It could still take longer to make.

What are you asking the workshop to make?

A print-ready file and a sketch are different starting points. With a file, the first questions are about scale, orientation and whether the features can be printed as drawn. With a sketch, someone also needs to establish dimensions, build the model and agree which surfaces must fit. Ask whether design work and a first prototype are included in your quotation.

Two printed lizards on a turquoise base in the Robin 3D Print workshop
A print from our Aberdeen workshop. The shape and the detail matter as well as the amount of filament.

Where the machine time goes

Consider a flat plate and a tall, finely detailed model. Even with similar material consumption, the printer may spend very different amounts of time making them. A finer layer height adds layers. Overhangs may need temporary supports that use material and take time to remove. Sanding or finishing a visible face adds hands-on work after the printer stops.

One prototype or ten finished parts?

A batch can spread the initial modelling work over several parts. Each copy still takes machine time and may need finishing. If the design has to fit another object, ask for one test piece before committing to the batch. Finding a misplaced hole on the first copy is much easier than finding it on the tenth.

What to send for a useful quote

Send the file if you have one, the overall dimensions with units, the quantity, the intended use and your deadline. Point out the dimension that really matters: for example, “the spacer must fit between two plates 18 mm apart”. Mention the finish you expect and whether you need delivery. This gives Robin a basis for a project-specific quote, including any design work.

Upload your model for a quote. If you only have a sketch, tell us about the part.

Further reading: Prusa’s guide to calculating print costs.